Blog / House Painting

Can you paint a brick or slump block house?

Mike Ricker·Updated November 19, 2026
Cream-colored brick wall on a covered patio with windows and furniture masked in plastic for painting

Yes, you can paint brick and slump block. Both are masonry, and both take paint when they're washed, dried, primed with a masonry primer and finished with paint made for masonry.

The real question is whether you should. Once masonry is painted, it stays painted: the paint needs upkeep, and taking it back off is hard. If you want a new look but aren't sure, there are softer options like stain or limewash.

Brick vs. slump block: what you have

Brick is made from fired clay, in small units with mortar joints. Slump block is a concrete block with a rough, bulged face that looks a bit like adobe. Plenty of older Valley homes are built from one or the other, and homeowners often use the words loosely. One caller described their home this way: "So you know that is a slump block house. So those are brick walls."

Either way, the surface is porous masonry, not stucco. That changes how it should be cleaned, primed and painted. If your walls are smooth concrete block rather than slump block, our guide to painting cinder block walls covers that too.

Should you paint brick?

It depends on what you want and how long you plan to keep it. The Brick Industry Association, a national trade group, says painting brick is possible but should be approached with caution. Its main concerns:

  • Brick lets moisture vapor pass through it. Paint can trap that moisture inside.
  • Unpainted brick needs almost no upkeep. Painted brick needs repainting on a schedule.
  • Removing paint from brick later is slow, costly work.

That's national guidance, not a local rule. On the other side, people paint brick and block all the time to update a dated color, hide old patches, or pull a mixed exterior together. We get that request too. As one of our team told a caller, people "request, you know, can you, like, paint the red brick of our old house? And we can."

Options besides paint

If you want a new look without a full paint film, the Brick Industry Association lists a few alternatives:

  • Limewash: a lime, water and pigment finish that gives a whitewashed look and keeps the brick's texture.
  • Stain: soaks into the surface so the texture shows through, on the brick, the mortar, or both.
  • Mineral paint: bonds to the brick without forming a film, so the brick can still breathe.
  • Mortar wash: a thin coat of mortar that lets some of the brick show through.

Some homes already have a version of this. One homeowner told us: "So the house itself is 50% brick. Like a whitewash brick."

How brick and block get painted

If you decide to paint, the prep matters more than the paint. The Brick Industry Association's steps line up with how masonry is prepped on any good exterior job:

  1. 1
    Clean the surface thoroughly so the primer bonds to the masonry, not the dirt.
  2. 2
    Let it dry completely. Masonry holds water longer than you'd think.
  3. 3
    Prime with a primer made for masonry.
  4. 4
    Finish with a breathable paint made for brick and block.

Washing is where shortcuts show up first. One caller told us another company only hose-washed the brick wall she wanted painted, and she was "flabbergasted." Our Surface Preparation Standard calls for every exterior surface to be pressure washed at 2,500 PSI or more, adjusted for the surface, and allowed to dry fully before anything is applied.

Painters in white work clothes working on a brick building with drop cloths on the ground
Painting a brick exterior after it's been washed and dried.

Heads up

Brand-new brick needs time. The Brick Industry Association says not to paint new brickwork sooner than 28 days after it's finished.

Painting around the brick instead

You don't have to paint the brick to freshen the house. Some homeowners keep the masonry natural and paint everything else. One wrote: "Our house is mostly brick. We are looking to have the small add on, the trim, and the non brick parts painted."

That approach keeps the brick's low upkeep and still updates the trim, fascia, doors and any stucco sections. It's often the easiest choice on an older home, like the caller looking for "exterior paint for a masonry home built in 1948."

In Peoria and across the West Valley, our Phoenix office will look at your brick or block with you, talk through paint versus the other options, and put the price in writing on the spot, with no deposit. See our exterior house painting page for how the job works.

Questions

Yes. Slump block is concrete masonry, so it gets the same steps as brick: clean, dry, a masonry primer, then a breathable masonry paint.

Thinking about painting your brick or block?

Call (602) 540-7471 or request a free proposal. We'll put the price in writing on the spot, with no deposit.

Written by

Mike Ricker

Mike Ricker writes for Crash of Rhinos Painting & Garage Floors.

Call (602) 540-7471Free Proposal